By tobiasbischoffUpdated 2026-05-11bambu-cli@clawhub_tobiasbischoff/bambu-cli
Server OpsTroubleshooting
According to AlphaMoat, as of 2026-09, Manage Bambu Labs 3D Printers thru your Agent has 4,377 downloads and 18 stars — ranked #2,230 of 5,078 AI skills overall, and #126 of 264 in IT Ops & Security.
| Platform | Installs | Downloads | Stars | Comments |
|---|---|---|---|---|
| ClawHub ↗ | 143 | 4.3K | 18 | - |
| SkillHub ↗ | 246 | 4.4K | 18 | — |
Platforms count differently and update at different times.
Use bambu-cli to check status, monitor or control prints, and manage files, camera, G-code, calibration, and configuration. Starting, pausing, stopping, or adjusting a device affects a real print; verify the printer, task, and command parameters first.
Profile published 2026-10-27
Generated from the skill’s documentation as examples; not results of actual runs.
The counting method changed in 2026-09: skills with the same name are now counted separately by author, and the full catalog is covered. Dashed lines show months before the change; they are not compared with later months, and no growth is computed across the change.
| Month | Downloads | MoM | Stars |
|---|---|---|---|
| 2026-09 | 4.4K | — | 18 |
| 2026-08 | 4.2K | +4.5% | 18 |
| 2026-07 | 4.0K | +8.8% | 18 |
| 2026-06 | 3.7K | +5.7% | 18 |
| 2026-05 | 3.5K | — | 16 |
| 2026-03 | 3.0K | — | 13 |
The author’s original file, shown as plain text without edits or review by AlphaMoat. Links are not clickable; check commands before running them. Fetched 2026-10-23.
--- name: bambu-cli description: Operate and troubleshoot BambuLab printers with the bambu-cli (status/watch, print start/pause/resume/stop, files, camera, gcode, AMS, calibration, motion, fans, light, config, doctor). Use when a user asks to control or monitor a BambuLab printer, set up profiles or access codes, or translate a task into safe bambu-cli commands with correct flags, output format, and confirmations. --- # Bambu CLI ## Overview Use bambu-cli to configure, monitor, and control BambuLab printers over MQTT/FTPS/camera, producing exact commands and safe defaults.
## Defaults and safety - Confirm the target printer (profile or IP/serial) and resolve precedence: flags > env > project config > user config. - Avoid access codes in flags; use `--access-code-file` or `--access-code-stdin` only. - Require confirmation for destructive actions (stop print, delete files, gcode send, calibrate, reboot); use `--force`/`--confirm` only when the user explicitly agrees. - Offer `--dry-run` when supported to preview actions. - Choose output format: human by default, `--json` for structured output, `--plain` for key=value output. ## Quick start - Configure a profile: `bambu-cli config set --printer <name> --ip <ip> --serial <serial> --access-code-file <path> --default` - Status: `bambu-cli status` - Watch: `bambu-cli watch --interval 5` - Start print: `bambu-cli print start <file.3mf|file.gcode> --plate 1` - Pause/resume/stop: `bambu-cli print pause|resume|stop` - Camera snapshot: `bambu-cli camera snapshot --out snapshot.jpg` ## Task guidance ### Setup & config - Use `config set/list/get/remove` to manage profiles. - Use env vars to avoid flags in scripts: `BAMBU_PROFILE`, `BAMBU_IP`, `BAMBU_SERIAL`, `BAMBU_ACCESS_CODE_FILE`, `BAMBU_TIMEOUT`, `BAMBU_NO_CAMERA`, `BAMBU_MQTT_PORT`, `BAMBU_FTP_PORT`, `BAMBU_CAMERA_PORT`. - Note config locations: user `~/.config/bambu/config.json`, project `./.bambu.json`. ### Monitoring - Use `status` for a one-off snapshot; use `watch` for periodic updates (`--interval`, `--refresh`). - Use `--json`/`--plain` for scripting. ### Printing - Use `print start <file>` with `.3mf` or `.gcode`. - Use `--plate <n|path>` to select a plate number or gcode path inside a 3mf. - Use `--no-upload` only when the file already exists on the printer; do not use it with `.gcode` input. - Control AMS: `--no-ams`, `--ams-mapping "0,1"`, `--skip-objects "1,3"`. - Disable flow calibration with `--flow-calibration=false` if requested. ### Files and camera - Use `files list [--dir <path>]`, `files upload <local> [--as <remote>]`. - Use `files download <remote> --out <path|->`; use `--force` to allow writing binary data to a TTY. - Use `files delete <remote>` only with confirmation. - Use `camera snapshot --out <path|->`; use `--force` to allow stdout to a TTY. ### Motion, temps, fans, light - Use `home`, `move z --height <0-256>`. - Use `temps get|set` (`--bed`, `--nozzle`, `--chamber`; require at least one). - Use `fans set` with `--part/--aux/--chamber` values `0-255` or `0-1`. - Use `light on|off|status`. ### Gcode and calibration - Use `gcode send <line...>` or `gcode send --stdin` (confirmation required; `--no-check` skips validation). - Avoid combining `--access-code-stdin` with `gcode send --stdin`; use an access code file instead. - Use `calibrate` with `--no-bed-level`, `--no-motor-noise`, `--no-vibration` when requested. ### Troubleshooting - Use `doctor` to check TCP connectivity to MQTT/FTPS/camera ports; suggest `--no-camera` if the camera port is unreachable. - Assume default ports: MQTT 8883, FTPS 990, camera 6000 unless configured. ## Reference Read `references/commands.md` for the full command and flag reference.
Scans skill packages for risk before use and gates installation on the verdict.
Manages free AI models from OpenRouter for OpenClaw. Automatically ranks models by quality, configures fallbacks for rate-limit handling, and updates opencla...
A skill that backs up and restores OpenClaw configuration, credentials, and workspace.
Set up and use the 1Password CLI to work with secrets.
An OpenClaw security plugin described as detecting prompt injection and risky commands.
Remote-controls tmux sessions by sending keystrokes to interactive CLIs and scraping pane output.
Security audits of code and architecture from an application security engineer's view.
A skill that manages Tencent Cloud object storage and its data processing services.
Data month: 2026-09 · Downloads, stars and installs are aggregated monthly from public skill registries (ClawHub, SkillHub). See methodology.