據 AlphaMoat 統計,截至 2026-09,Manage Bambu Labs 3D Printers thru your Agent 累計下載 4,377 次、獲 18 個星標,在全部 5,078 個 AI 技能中排名第 2,230 位,在「運維安全」分類(264 個)中排名第 126 位。

累計安裝

246

累計下載

4377

星標

全站排名

#2,230

全站前 44% · 「運維安全」前 48%

平台	累計安裝	累計下載	星標	評論
ClawHub ↗	143	4339	18	-
SkillHub ↗	246	4377	18	—

各平台的計數口徑不同,統計時間不一致。

這個技能是做什麼的

透過 bambu-cli 檢視狀態、監控或控制列印任務，並管理檔案、攝影機、G-code、校準和配置。啟動、暫停、停止或調整裝置會影響真實列印；執行前核對裝置、任務和命令引數。

資料釋出於 2026-10-27

可以用來做什麼

檢視印表機狀態和任務
管理列印檔案與裝置設定

什麼時候用

需要監控或排查印表機時
開始、暫停或停止列印前

示例提示詞

以下是根據技能文件生成的示例,不代表實際執行結果。

先讀取印表機狀態和當前任務，不要更改。

展示將執行的列印命令及目標裝置，等待我確認。

月度資料趨勢

累計下載4377

星標18

2026-09 起統計方法調整:同名技能按作者分別統計,並覆蓋全部技能。圖中虛線為調整前的月份,與之後的資料不直接比較,也不計算跨越調整的增長。

月份	累計下載	環比	星標
2026-09	4377	—	18
2026-08	4183	+4.5%	18
2026-07	4002	+8.8%	18
2026-06	3677	+5.7%	18
2026-05	3480	—	16
2026-03	2970	—	13

SKILL.md 原文

以下是作者釋出的原始檔案,按純文字顯示,本站未做修改或稽核;其中的連結不可點選,命令請核實後再執行。抓取於 2026-10-23。

3.6 KB · ClawHub v1.0.0

---
name: bambu-cli
description: Operate and troubleshoot BambuLab printers with the bambu-cli (status/watch, print start/pause/resume/stop, files, camera, gcode, AMS, calibration, motion, fans, light, config, doctor). Use when a user asks to control or monitor a BambuLab printer, set up profiles or access codes, or translate a task into safe bambu-cli commands with correct flags, output format, and confirmations.
---

# Bambu CLI

## Overview
Use bambu-cli to configure, monitor, and control BambuLab printers over MQTT/FTPS/camera, producing exact commands and safe defaults.

展開全部(共 66 行)

## Defaults and safety
- Confirm the target printer (profile or IP/serial) and resolve precedence: flags > env > project config > user config.
- Avoid access codes in flags; use `--access-code-file` or `--access-code-stdin` only.
- Require confirmation for destructive actions (stop print, delete files, gcode send, calibrate, reboot); use `--force`/`--confirm` only when the user explicitly agrees.
- Offer `--dry-run` when supported to preview actions.
- Choose output format: human by default, `--json` for structured output, `--plain` for key=value output.

## Quick start
- Configure a profile: `bambu-cli config set --printer <name> --ip <ip> --serial <serial> --access-code-file <path> --default`
- Status: `bambu-cli status`
- Watch: `bambu-cli watch --interval 5`
- Start print: `bambu-cli print start <file.3mf|file.gcode> --plate 1`
- Pause/resume/stop: `bambu-cli print pause|resume|stop`
- Camera snapshot: `bambu-cli camera snapshot --out snapshot.jpg`

## Task guidance
### Setup & config
- Use `config set/list/get/remove` to manage profiles.
- Use env vars to avoid flags in scripts: `BAMBU_PROFILE`, `BAMBU_IP`, `BAMBU_SERIAL`, `BAMBU_ACCESS_CODE_FILE`, `BAMBU_TIMEOUT`, `BAMBU_NO_CAMERA`, `BAMBU_MQTT_PORT`, `BAMBU_FTP_PORT`, `BAMBU_CAMERA_PORT`.
- Note config locations: user `~/.config/bambu/config.json`, project `./.bambu.json`.

### Monitoring
- Use `status` for a one-off snapshot; use `watch` for periodic updates (`--interval`, `--refresh`).
- Use `--json`/`--plain` for scripting.

### Printing
- Use `print start <file>` with `.3mf` or `.gcode`.
- Use `--plate <n|path>` to select a plate number or gcode path inside a 3mf.
- Use `--no-upload` only when the file already exists on the printer; do not use it with `.gcode` input.
- Control AMS: `--no-ams`, `--ams-mapping "0,1"`, `--skip-objects "1,3"`.
- Disable flow calibration with `--flow-calibration=false` if requested.

### Files and camera
- Use `files list [--dir <path>]`, `files upload <local> [--as <remote>]`.
- Use `files download <remote> --out <path|->`; use `--force` to allow writing binary data to a TTY.
- Use `files delete <remote>` only with confirmation.
- Use `camera snapshot --out <path|->`; use `--force` to allow stdout to a TTY.

### Motion, temps, fans, light
- Use `home`, `move z --height <0-256>`.
- Use `temps get|set` (`--bed`, `--nozzle`, `--chamber`; require at least one).
- Use `fans set` with `--part/--aux/--chamber` values `0-255` or `0-1`.
- Use `light on|off|status`.

### Gcode and calibration
- Use `gcode send <line...>` or `gcode send --stdin` (confirmation required; `--no-check` skips validation).
- Avoid combining `--access-code-stdin` with `gcode send --stdin`; use an access code file instead.
- Use `calibrate` with `--no-bed-level`, `--no-motor-noise`, `--no-vibration` when requested.

### Troubleshooting
- Use `doctor` to check TCP connectivity to MQTT/FTPS/camera ports; suggest `--no-camera` if the camera port is unreachable.
- Assume default ports: MQTT 8883, FTPS 990, camera 6000 unless configured.

## Reference
Read `references/commands.md` for the full command and flag reference.