據 AlphaMoat 統計,截至 2026-10,Network Scanner 累計下載 7,784 次、獲 1 個星標,按累計下載量在本次參與排名的 10,914 個 AI 技能中排名第 3,567 位,在「運維安全」分類(502 個)中排名第 106 位。
列表預設按累計下載量排序,也可按星標排序;詳情頁排名按累計下載量計算。
| 平台 | 累計下載 | 星標 | 評論 |
|---|---|---|---|
| ClawHub ↗ | 6325 | - | - |
| SkillHub ↗ | 7784 | 1 | — |
各平台的計數口徑不同,統計時間不一致。
內建三類安全檢查以防誤掃:blocklist 配置中的網路一律攔截;掃描公共(非 RFC1918)IP 段被阻止;對臨時 CIDR 校驗路由是否走私有閘道器,而 networks.json 中顯式配置的受信網路跳過路由校驗。依賴 nmap 與 dig,MAC 地址發現建議 sudo(nmap 需要 ARP 許可權),也支援 --no-sudo(可能拿不到 MAC)。用法:python3 scripts/scan.py 自動探測當前網路,或指定 CIDR(如 192.168.1.0/24)、--dns 自定義解析伺服器、--json 輸出 JSON、--init-config 生成示例配置、--list 列出已配置網路;命名網路與 blocklist 配置在 ~/.config/network-scanner/networks.json。預設輸出 Markdown 裝置表(IP/名稱/MAC/廠商),JSON 輸出含 device_count。適用場景:裝置清點、安全審計找未知裝置、生成網路文件、接入家庭自動化檢測裝置線上。该技能 的安全證據提示掃描指令碼存在不安全命令執行、公共目標防護弱於宣傳(尤其在已配置網路場景),建議先審查指令碼、僅限授權私網並優先 --no-sudo。
資料釋出於 2026-10-29
以下是根據技能文件生成的示例,不代表實際執行結果。
2026-09 起統計方法調整:同名技能按作者分別統計,並覆蓋全部技能。圖中虛線為調整前的月份,與之後的資料不直接比較,也不計算跨越調整的增長。
| 月份 | 累計下載 | 環比 | 星標 |
|---|---|---|---|
| 2026-10 | 7784 | — | 1 |
| 2026-09 | 6283 | — | 1 |
| 2026-08 | 5981 | +4.1% | 1 |
| 2026-07 | 5745 | +6.6% | 1 |
| 2026-06 | 5388 | +4.3% | - |
| 2026-05 | 5165 | — | - |
以下是作者釋出的原始檔案,按純文字顯示,本站未做修改或稽核;其中的連結不可點選,命令請核實後再執行。抓取於 2026-10-23。
---
name: network-scanner
description: Scan networks to discover devices, gather MAC addresses, vendors, and hostnames. Includes safety checks to prevent accidental scanning of public networks.
homepage: https://clawhub.com/skills/network-scanner
metadata:
openclaw:
emoji: "🔍"
requires:
bins: ["nmap", "dig"]
tags: - network
- discovery
- devices
- nmap
- security
---
# Network Scanner
Discover and identify devices on local or remote networks using nmap. Gathers IP addresses, hostnames (via reverse DNS), MAC addresses, and vendor identification.
**Safety First:** Includes built-in protection against accidentally scanning public IP ranges or networks without proper private routing — preventing abuse reports from hosting providers.
## Requirements
- `nmap` - Network scanning (`apt install nmap` or `brew install nmap`)
- `dig` - DNS lookups (usually pre-installed)
- `sudo` access recommended for MAC address discovery
## Quick Start
```bash
# Auto-detect and scan current network
python3 scripts/scan.py
# Scan a specific CIDR
python3 scripts/scan.py 192.168.1.0/24
# Scan with custom DNS server for reverse lookups
python3 scripts/scan.py 192.168.1.0/24 --dns 192.168.1.1
# Output as JSON
python3 scripts/scan.py --json
```
## Configuration
Configure named networks in `~/.config/network-scanner/networks.json`:
```json
{
"networks": {
"home": {
"cidr": "192.168.1.0/24",
"dns": "192.168.1.1",
"description": "Home Network"
},
"office": {
"cidr": "10.0.0.0/24",
"dns": "10.0.0.1",
"description": "Office Network"
}
},
"blocklist": [
{
"cidr": "10.99.0.0/24",
"reason": "No private route from this host"
}
]
}
```
Then scan by name:
```bash
python3 scripts/scan.py home
python3 scripts/scan.py office --json
```
## Safety Features
The scanner includes multiple safety checks to prevent accidental abuse:
1. **Blocklist** — Networks in the `blocklist` config array are always blocked
2. **Public IP check** — Scanning public (non-RFC1918) IP ranges is blocked
3. **Route verification** — For ad-hoc CIDRs, verifies the route uses private gateways
**Trusted networks** (configured in `networks.json`) skip route verification since you've explicitly approved them.
```bash
# Blocked - public IP range
$ python3 scripts/scan.py 8.8.8.0/24
❌ BLOCKED: Target 8.8.8.0/24 is a PUBLIC IP range
# Blocked - in blocklist
$ python3 scripts/scan.py 10.99.0.0/24
❌ BLOCKED: 10.99.0.0/24 is blocklisted
# Allowed - configured trusted network
$ python3 scripts/scan.py home
✓ Scanning 192.168.1.0/24...
```
## Commands
```bash
# Create example config
python3 scripts/scan.py --init-config
# List configured networks
python3 scripts/scan.py --list
# Scan without sudo (may miss MAC addresses)
python3 scripts/scan.py home --no-sudo
```
## Output Formats
**Markdown (default):**
```
### Home Network
*Last scan: 2026-01-28 00:10*
| IP | Name | MAC | Vendor |
|----|------|-----|--------|
| 192.168.1.1 | router.local | AA:BB:CC:DD:EE:FF | Ubiquiti |
| 192.168.1.100 | nas.local | 11:22:33:44:55:66 | Synology |
*2 devices found*
```
**JSON (--json):**
```json
{
"network": "Home Network",
"cidr": "192.168.1.0/24",
"devices": [
{
"ip": "192.168.1.1",
"hostname": "router.local",
"mac": "AA:BB:CC:DD:EE:FF",
"vendor": "Ubiquiti"
}
],
"scanned_at": "2026-01-28T00:10:00",
"device_count": 2
}
```
## Use Cases
- **Device inventory**: Keep track of all devices on your network
- **Security audits**: Identify unknown devices
- **Documentation**: Generate network maps for documentation
- **Automation**: Integrate with home automation to detect device presence
## Tips
- Use `sudo` for accurate MAC address detection (nmap needs privileges for ARP)
- Configure your local DNS server for better hostname resolution
- Add configured networks to skip route verification on every scan
- Add networks you can't reach privately to the blocklist to prevent accidents
- Extend `MAC_VENDORS` in the script for better device identification
鍾馗.Skill——會更新漏洞庫的安全審查專家。直來直去、快刀斬亂麻,三層審查(靜態審計/行為模擬/供應鏈溯源)覆蓋12類風險,輸出結構化安全裁定(✅乾淨/⚠️可疑/🚫惡意)。Use when 使用者說"審查這個Skill"、"安全檢查"、"鍾馗看下"、"審一下"、"查一下這個skill"、安裝Skill前的安全評估、或需要審計SKILL.md的惡意載荷。
在使用技能包之前做安全掃描,並按結論決定放行或攔截的技能。
為 OpenClaw 配置 OpenRouter 免費模型與回退鏈的工具。
Parse, search, and analyze application logs across formats. Use when debugging from log files, setting up structured logging, analyzing error patterns, correlating events across services, parsing stack traces, or monitoring log output in real time.
用於安裝技能、包或外掛的安全檢查。請在執行任何 npm install、openclaw plugins install、clawhub install 或類似安裝命令之前使用。
網路安全與SRC漏洞掘金實戰技能。融合「系統學習路徑」與「SRC實戰掘金」雙模式: ①學習模式=法律→基礎→工具→靶場→攻防→就業全流程; ②實戰模式=直接指導在騰訊TSRC、阿里ASRC、百度BSRC等平台挖掘高價值漏洞變現。 當用戶提出以下問題時觸發: "我想學網路安全怎麼入門""SRC漏洞怎麼挖能賺錢""滲透測試需要學什麼" "Web安全漏洞原理是什麼""怎麼準備CTF比賽""護網面試會問什麼" "雲安全怎麼學""挖漏洞賺錢的方法""埠掃描指令碼怎麼寫" "SQL隱碼攻擊怎麼檢測""子域名怎麼列舉""XSS漏洞怎麼找" "靶場怎麼搭建""Kali Linux怎麼用""Metasploit怎麼入門" "等保測評是什麼""程式碼審計怎麼做""內網滲透怎麼學" "資訊洩露漏洞怎麼挖""越權漏洞怎麼測試""邏輯漏洞挖掘技巧" "簡歷怎麼寫才能進安全公司""安全行業面試題有哪些" "Burp Suite怎麼用""DVWA怎麼安裝""Pikachu靶場搭建" "Vulhub漏洞復現""網路安全法有什麼規定""CTF奪旗賽怎麼參加" "AWD比賽是什麼""應急響應怎麼做""攻擊溯源怎麼搞" "資料安全怎麼保障""公有云安全怎麼防護""私有云攻防怎麼做" "雲原生安全是什麼"。
這個技能特別簡單——你只需要呼叫它,給一個網站域名,它就會自動幫你跑一遍滲透測試,找出這個網站存在哪些安全漏洞。 不需要你配環境、不用你手動發包,一切自動化。測完直接出結果,告訴你哪裡有問題、怎麼修。 它的願景是:讓每個人都能成為白帽駭客——只要輸入一個域名,就能知道自己的網站安不安全。一切只為授權測試,只為發現漏洞、修復風險,讓網際網路更安全。
Security-first skill vetting for AI agents. Use before installing any skill from ClawdHub, GitHub, or other sources. Checks for red flags, permission scope, and suspicious patterns.
資料月份:2026-10 · 下載/星標數聚合自公開技能註冊庫(ClawHub、SkillHub),按月更新。口徑說明見資料方法。