據 AlphaMoat 統計,截至 2026-10,node-connect 累計下載 7,524 次、獲 2 個星標,按累計下載量在本次參與排名的 10,914 個 AI 技能中排名第 3,726 位,在「運維安全」分類(502 個)中排名第 112 位。
列表預設按累計下載量排序,也可按星標排序;詳情頁排名按累計下載量計算。
| 平台 | 累計下載 | 星標 | 評論 |
|---|---|---|---|
| ClawHub ↗ | 7160 | 1 | - |
| SkillHub ↗ | 7524 | 2 | — |
各平台的計數口徑不同,統計時間不一致。
先區分本機、區域網、Tailscale tailnet 或公開 URL 路由;資訊不清時詢問使用者使用的連線方式、錯誤原文和配對狀態,再按實際路由檢查配置與認證。批准配對前必須核實請求對應預期裝置。
資料釋出於 2026-10-27
以下是根據技能文件生成的示例,不代表實際執行結果。
2026-09 起統計方法調整:同名技能按作者分別統計,並覆蓋全部技能。圖中虛線為調整前的月份,與之後的資料不直接比較,也不計算跨越調整的增長。 該技能有同名的其他版本,調整前的資料歸屬當前下載量最大的這一個。
| 月份 | 累計下載 | 環比 | 星標 |
|---|---|---|---|
| 2026-10 | 7524 | — | 2 |
| 2026-09 | 7030 | — | 2 |
| 2026-08 | 6924 | +5.8% | 2 |
| 2026-07 | 6542 | +29.2% | 2 |
| 2026-06 | 5064 | +7.7% | 1 |
| 2026-05 | 4702 | — | 1 |
| 2026-03 | 2388 | — | - |
以下是作者釋出的原始檔案,按純文字顯示,本站未做修改或稽核;其中的連結不可點選,命令請核實後再執行。抓取於 2026-10-23。
--- name: node-connect description: Diagnose OpenClaw node connection and pairing failures for Android, iOS, and macOS companion apps. Use when QR/setup code/manual connect fails, local Wi-Fi works but VPS/tailnet does not, or errors mention pairing required, unauthorized, bootstrap token invalid or expired, gateway.bind, gateway.remote.url, Tailscale, or plugins.entries.device-pair.config.publicUrl. --- # Node Connect Goal: find the one real route from node -> gateway, verify OpenClaw is advertising that route, then fix pairing/auth. ## Topology first
Decide which case you are in before proposing fixes: - same machine / emulator / USB tunnel - same LAN / local Wi-Fi - same Tailscale tailnet - public URL / reverse proxy Do not mix them. - Local Wi-Fi problem: do not switch to Tailscale unless remote access is actually needed. - VPS / remote gateway problem: do not keep debugging `localhost` or LAN IPs. ## If ambiguous, ask first If the setup is unclear or the failure report is vague, ask short clarifying questions before diagnosing. Ask for: - which route they intend: same machine, same LAN, Tailscale tailnet, or public URL - whether they used QR/setup code or manual host/port - the exact app text/status/error, quoted exactly if possible - whether `openclaw devices list` shows a pending pairing request Do not guess from `can't connect`. ## Canonical checks Prefer `openclaw qr --json`. It uses the same setup-code payload Android scans. ```bash openclaw config get gateway.mode openclaw config get gateway.bind openclaw config get gateway.tailscale.mode openclaw config get gateway.remote.url openclaw config get gateway.auth.mode openclaw config get gateway.auth.allowTailscale openclaw config get plugins.entries.device-pair.config.publicUrl openclaw qr --json openclaw devices list openclaw nodes status ``` If this OpenClaw instance is pointed at a remote gateway, also run: ```bash openclaw qr --remote --json ``` If Tailscale is part of the story: ```bash tailscale status --json ``` ## Read the result, not guesses `openclaw qr --json` success means: - `gatewayUrl`: this is the actual endpoint the app should use. - `urlSource`: this tells you which config path won. Common good sources: - `gateway.bind=lan`: same Wi-Fi / LAN only - `gateway.bind=tailnet`: direct tailnet access - `gateway.tailscale.mode=serve` or `gateway.tailscale.mode=funnel`: Tailscale route - `plugins.entries.device-pair.config.publicUrl`: explicit public/reverse-proxy route - `gateway.remote.url`: remote gateway route ## Root-cause map If `openclaw qr --json` says `Gateway is only bound to loopback`: - remote node cannot connect yet - fix the route, then generate a fresh setup code - `gateway.bind=auto` is not enough if the effective QR route is still loopback - same LAN: use `gateway.bind=lan` - same tailnet: prefer `gateway.tailscale.mode=serve` or use `gateway.bind=tailnet` - public internet: set a real `plugins.entries.device-pair.config.publicUrl` or `gateway.remote.url` If `gateway.bind=tailnet set, but no tailnet IP was found`: - gateway host is not actually on Tailscale If `qr --remote requires gateway.remote.url`: - remote-mode config is incomplete If the app says `pairing required`: - network route and auth worked - approve the pending device ```bash openclaw devices list openclaw devices approve --latest ``` If the app says `bootstrap token invalid or expired`: - old setup code - generate a fresh one and rescan - do this after any URL/auth fix too If the app says `unauthorized`: - wrong token/password, or wrong Tailscale expectation - for Tailscale Serve, `gateway.auth.allowTailscale` must match the intended flow - otherwise use explicit token/password ## Fast heuristics - Same Wi-Fi setup + gateway advertises `127.0.0.1`, `localhost`, or loopback-only config: wrong. - Remote setup + setup/manual uses private LAN IP: wrong. - Tailnet setup + gateway advertises LAN IP instead of MagicDNS / tailnet route: wrong. - Public URL set but QR still advertises something else: inspect `urlSource`; config is not what you think. - `openclaw devices list` shows pending requests: stop changing network config and approve first. ## Fix style Reply with one concrete diagnosis and one route. If there is not enough signal yet, ask for setup + exact app text instead of guessing. Good: - `The gateway is still loopback-only, so a node on another network can never reach it. Enable Tailscale Serve, restart the gateway, run openclaw qr again, rescan, then approve the pending device pairing.` Bad: - `Maybe LAN, maybe Tailscale, maybe port forwarding, maybe public URL.`
鍾馗.Skill——會更新漏洞庫的安全審查專家。直來直去、快刀斬亂麻,三層審查(靜態審計/行為模擬/供應鏈溯源)覆蓋12類風險,輸出結構化安全裁定(✅乾淨/⚠️可疑/🚫惡意)。Use when 使用者說"審查這個Skill"、"安全檢查"、"鍾馗看下"、"審一下"、"查一下這個skill"、安裝Skill前的安全評估、或需要審計SKILL.md的惡意載荷。
在使用技能包之前做安全掃描,並按結論決定放行或攔截的技能。
為 OpenClaw 配置 OpenRouter 免費模型與回退鏈的工具。
Parse, search, and analyze application logs across formats. Use when debugging from log files, setting up structured logging, analyzing error patterns, correlating events across services, parsing stack traces, or monitoring log output in real time.
用於安裝技能、包或外掛的安全檢查。請在執行任何 npm install、openclaw plugins install、clawhub install 或類似安裝命令之前使用。
網路安全與SRC漏洞掘金實戰技能。融合「系統學習路徑」與「SRC實戰掘金」雙模式: ①學習模式=法律→基礎→工具→靶場→攻防→就業全流程; ②實戰模式=直接指導在騰訊TSRC、阿里ASRC、百度BSRC等平台挖掘高價值漏洞變現。 當用戶提出以下問題時觸發: "我想學網路安全怎麼入門""SRC漏洞怎麼挖能賺錢""滲透測試需要學什麼" "Web安全漏洞原理是什麼""怎麼準備CTF比賽""護網面試會問什麼" "雲安全怎麼學""挖漏洞賺錢的方法""埠掃描指令碼怎麼寫" "SQL隱碼攻擊怎麼檢測""子域名怎麼列舉""XSS漏洞怎麼找" "靶場怎麼搭建""Kali Linux怎麼用""Metasploit怎麼入門" "等保測評是什麼""程式碼審計怎麼做""內網滲透怎麼學" "資訊洩露漏洞怎麼挖""越權漏洞怎麼測試""邏輯漏洞挖掘技巧" "簡歷怎麼寫才能進安全公司""安全行業面試題有哪些" "Burp Suite怎麼用""DVWA怎麼安裝""Pikachu靶場搭建" "Vulhub漏洞復現""網路安全法有什麼規定""CTF奪旗賽怎麼參加" "AWD比賽是什麼""應急響應怎麼做""攻擊溯源怎麼搞" "資料安全怎麼保障""公有云安全怎麼防護""私有云攻防怎麼做" "雲原生安全是什麼"。
這個技能特別簡單——你只需要呼叫它,給一個網站域名,它就會自動幫你跑一遍滲透測試,找出這個網站存在哪些安全漏洞。 不需要你配環境、不用你手動發包,一切自動化。測完直接出結果,告訴你哪裡有問題、怎麼修。 它的願景是:讓每個人都能成為白帽駭客——只要輸入一個域名,就能知道自己的網站安不安全。一切只為授權測試,只為發現漏洞、修復風險,讓網際網路更安全。
Security-first skill vetting for AI agents. Use before installing any skill from ClawdHub, GitHub, or other sources. Checks for red flags, permission scope, and suspicious patterns.
資料月份:2026-10 · 下載/星標數聚合自公開技能註冊庫(ClawHub、SkillHub),按月更新。口徑說明見資料方法。