据 AlphaMoat 统计,截至 2026-10,clawsec-suite 累计下载 16,319 次、获 8 个星标,按累计下载量在本次参与排名的 10,914 个 AI 技能中排名第 1,727 位,在「运维安全」分类(502 个)中排名第 56 位。
列表默认按累计下载量排序,也可按星标排序;详情页排名按累计下载量计算。
| 平台 | 累计下载 | 星标 | 评论 |
|---|---|---|---|
| ClawHub ↗ | 1.3万 | 8 | - |
| SkillHub ↗ | 1.6万 | 8 | — |
各平台的计数口径不同,统计时间不一致。
说明签名 feed 检查、公告状态、已装技能匹配、目录发现和可选持久 hook 或 cron 扫描。高风险安装与移除需在展示公告后再次显式确认。应在实际执行路径核验签名公钥、feed 签名及校验清单,关闭无签名绕过,启用前审查远程覆盖配置和持久自动化。文档示例本身不能证明完整验证。
资料发布于 2026-10-27
以下是根据技能文档生成的示例,不代表实际运行结果。
2026-09 起统计方法调整:同名技能按作者分别统计,并覆盖全部技能。图中虚线为调整前的月份,与之后的数据不直接比较,也不计算跨越调整的增长。
| 月份 | 累计下载 | 环比 | 星标 |
|---|---|---|---|
| 2026-10 | 1.6万 | — | 8 |
| 2026-09 | 1.2万 | — | 8 |
| 2026-08 | 1.2万 | +4.9% | 8 |
| 2026-07 | 1.2万 | +5.0% | 8 |
| 2026-06 | 1.1万 | +8.3% | 8 |
| 2026-05 | 1.0万 | — | 8 |
| 2026-03 | 7,880 | — | 7 |
以下是作者发布的原始文件,按纯文本显示,本站未做修改或审核;其中的链接不可点击,命令请核实后再运行。抓取于 2026-10-23。
---
name: clawsec-suite
version: 0.1.16
description: ClawSec suite manager with embedded advisory-feed monitoring, cryptographic signature verification, approval-gated malicious-skill response, and guided setup for additional security skills.
homepage: https://clawsec.prompt.security
clawdis:
emoji: "📦"
requires:
bins: [node, npx, openclaw, curl, jq, shasum, openssl, unzip]
---
# ClawSec Suite
## Vercel Skills Installation
Install with the Vercel Skills CLI for this harness:
```bash
npx skills add prompt-security/clawsec --skill clawsec-suite -a openclaw -y
```
## Operational Notes
- Required runtime: `node`, `npx`, `openclaw`, `curl`, `jq`, `shasum`, `openssl`, `unzip`
- Side effects: setup scripts install an advisory hook under `~/.openclaw/hooks`, optionally create an unattended `openclaw cron` job, and use `npx clawhub@latest install` for guarded installs
- Network behavior: fetches signed advisory feed artifacts and remote catalog metadata unless you pin local paths
- Trust model: the suite can recommend removal or block risky installs, but removal/install overrides stay approval-gated
This means `clawsec-suite` can:
- monitor the ClawSec advisory feed,
- track which advisories are new since last check,
- cross-reference advisories against locally installed skills,
- recommend removal for malicious-skill advisories and require explicit user approval first,
- and still act as the setup/management entrypoint for other ClawSec protections.
## Included vs Optional Protections
### Built into clawsec-suite
- Embedded signed advisory trust set: `advisories/feed.json`, `feed.json.sig`, `checksums.json`, `checksums.json.sig`, and `feed-signing-public.pem`
- Portable heartbeat workflow in `HEARTBEAT.md`
- Advisory polling + state tracking + affected-skill checks
- OpenClaw advisory guardian hook package: `hooks/clawsec-advisory-guardian/`
- Setup scripts for hook and optional cron scheduling: `scripts/`
- Guarded installer: `scripts/guarded_skill_install.mjs`
- Dynamic catalog discovery for installable skills: `scripts/discover_skill_catalog.mjs`
### Installed separately (dynamic catalog)
`clawsec-suite` does not hard-code add-on skill names in this document.
Discover the current catalog from the authoritative index (`https://clawsec.prompt.security/skills/index.json`) at runtime:
```bash
SUITE_DIR="${INSTALL_ROOT:-$HOME/.openclaw/skills}/clawsec-suite"
node "$SUITE_DIR/scripts/discover_skill_catalog.mjs"
```
Fallback behavior:
- If the remote catalog index is reachable and valid, the suite uses it.
- If the remote index is unavailable or malformed, the script falls back to suite-local catalog metadata in `skill.json`.
## Installation
### Cross-shell path note
- In `bash`/`zsh`, keep path variables expandable (for example, `INSTALL_ROOT="$HOME/.openclaw/skills"`).
- Do not single-quote home-variable paths (avoid `'$HOME/.openclaw/skills'`).
- In PowerShell, set an explicit path:
- `$env:INSTALL_ROOT = Join-Path $HOME ".openclaw\\skills"`
- If a path is passed with unresolved tokens (like `\$HOME/...`), suite scripts now fail fast with a clear error.
### Option A: Via clawhub (recommended)
```bash
npx clawhub@latest install clawsec-suite
```
### Option B: Manual download with signature + checksum verification
```bash
set -euo pipefail
VERSION="${SKILL_VERSION:?Set SKILL_VERSION (e.g. 0.0.8)}"
INSTALL_ROOT="${INSTALL_ROOT:-$HOME/.openclaw/skills}"
DEST="$INSTALL_ROOT/clawsec-suite"
BASE="https://github.com/prompt-security/clawsec/releases/download/clawsec-suite-v${VERSION}"
TEMP_DIR="$(mktemp -d)"
trap 'rm -rf "$TEMP_DIR"' EXIT
# Pinned release-signing public key (verify fingerprint out-of-band on first use)
# Fingerprint (SHA-256 of SPKI DER): 711424e4535f84093fefb024cd1ca4ec87439e53907b305b79a631d5befba9c8
RELEASE_PUBKEY_SHA256="711424e4535f84093fefb024cd1ca4ec87439e53907b305b79a631d5befba9c8"
cat > "$TEMP_DIR/release-signing-public.pem" <<'PEM'
-----BEGIN PUBLIC KEY-----
MCowBQYDK2VwAyEAS7nijfMcUoOBCj4yOXJX+GYGv2pFl2Yaha1P4v5Cm6A=
-----END PUBLIC KEY-----
PEM
ACTUAL_KEY_SHA256="$(openssl pkey -pubin -in "$TEMP_DIR/release-signing-public.pem" -outform DER | shasum -a 256 | awk '{print $1}')"
if [ "$ACTUAL_KEY_SHA256" != "$RELEASE_PUBKEY_SHA256" ]; then
echo "ERROR: Release public key fingerprint mismatch" >&2
exit 1
fi
ZIP_NAME="clawsec-suite-v${VERSION}.zip"
# 1) Download release archive + signed checksums manifest + signing public key
curl -fsSL "$BASE/$ZIP_NAME" -o "$TEMP_DIR/$ZIP_NAME"
curl -fsSL "$BASE/checksums.json" -o "$TEMP_DIR/checksums.json"
curl -fsSL "$BASE/checksums.sig" -o "$TEMP_DIR/checksums.sig"
# 2) Verify checksums manifest signature before trusting any hashes
openssl base64 -d -A -in "$TEMP_DIR/checksums.sig" -out "$TEMP_DIR/checksums.sig.bin"
if ! openssl pkeyutl -verify \
-pubin \
-inkey "$TEMP_DIR/release-signing-public.pem" \
-sigfile "$TEMP_DIR/checksums.sig.bin" \
-rawin \
-in "$TEMP_DIR/checksums.json" >/dev/null 2>&1; then
echo "ERROR: checksums.json signature verification failed" >&2
exit 1
fi
EXPECTED_ZIP_SHA="$(jq -r '.archive.sha256 // empty' "$TEMP_DIR/checksums.json")"
if [ -z "$EXPECTED_ZIP_SHA" ]; then
echo "ERROR: checksums.json missing archive.sha256" >&2
exit 1
fi
if command -v shasum >/dev/null 2>&1; then
ACTUAL_ZIP_SHA="$(shasum -a 256 "$TEMP_DIR/$ZIP_NAME" | awk '{print $1}')"
else
ACTUAL_ZIP_SHA="$(sha256sum "$TEMP_DIR/$ZIP_NAME" | awk '{print $1}')"
fi
if [ "$EXPECTED_ZIP_SHA" != "$ACTUAL_ZIP_SHA" ]; then
echo "ERROR: Archive checksum mismatch for $ZIP_NAME" >&2
exit 1
fi
echo "Checksums manifest signature and archive hash verified."
# 3) Install verified archive
mkdir -p "$INSTALL_ROOT"
rm -rf "$DEST"
unzip -q "$TEMP_DIR/$ZIP_NAME" -d "$INSTALL_ROOT"
chmod 600 "$DEST/skill.json"
find "$DEST" -type f ! -name "skill.json" -exec chmod 644 {} \;
echo "Installed clawsec-suite v${VERSION} to: $DEST"
echo "Next step (OpenClaw): node \"\$DEST/scripts/setup_advisory_hook.mjs\""
```
## OpenClaw Automation (Hook + Optional Cron)
After installing the suite, enable the advisory guardian hook:
```bash
SUITE_DIR="${INSTALL_ROOT:-$HOME/.openclaw/skills}/clawsec-suite"
node "$SUITE_DIR/scripts/setup_advisory_hook.mjs"
```
The setup script prints a preflight review before it installs and enables the persistent hook.
Optional: create/update a periodic cron nudge (default every `6h`) that triggers a main-session advisory scan:
```bash
SUITE_DIR="${INSTALL_ROOT:-$HOME/.openclaw/skills}/clawsec-suite"
node "$SUITE_DIR/scripts/setup_advisory_cron.mjs"
```
The cron setup script prints a preflight review before it creates or updates the unattended job.
What this adds:
- scan on `agent:bootstrap` and `/new` (`command:new`),
- compare advisory `affected` entries against installed skills,
- consider advisories with `application: "openclaw"` (and legacy entries without `application` for backward compatibility),
- notify when new matches appear,
- and ask for explicit user approval before any removal flow.
Restart the OpenClaw gateway after enabling the hook. Then run `/new` once to force an immediate scan in the next session context.
## Guarded Skill Install Flow (Double Confirmation)
When the user asks to install a skill, treat that as the first request and run a guarded install check:
```bash
SUITE_DIR="${INSTALL_ROOT:-$HOME/.openclaw/skills}/clawsec-suite"
node "$SUITE_DIR/scripts/guarded_skill_install.mjs" --skill helper-plus --version 1.0.1
```
Behavior:
- If no advisory match is found, install proceeds.
- If `--version` is omitted, matching is conservative: any advisory that references the skill name is treated as a match.
- If advisory match is found, the script prints advisory context and exits with code `42`.
- Then require an explicit second confirmation from the user and rerun with `--confirm-advisory`:
```bash
node "$SUITE_DIR/scripts/guarded_skill_install.mjs" --skill helper-plus --version 1.0.1 --confirm-advisory
```
This enforces:
1. First confirmation: user asked to install.
2. Second confirmation: user explicitly approves install after seeing advisory details.
## Embedded Advisory Feed Behavior
The embedded feed logic uses these defaults:
- Remote consolidated feed URL: `https://clawsec.prompt.security/advisories/feed.json`
- Feed contents: NVD CVEs, approved community advisories, and provisional GHSA-without-CVE advisories.
- Remote feed signature URL: `${CLAWSEC_FEED_URL}.sig` (override with `CLAWSEC_FEED_SIG_URL`)
- Remote checksums manifest URL: sibling `checksums.json` (override with `CLAWSEC_FEED_CHECKSUMS_URL`)
- Local seed fallback: `~/.openclaw/skills/clawsec-suite/advisories/feed.json`
- Local feed signature: `${CLAWSEC_LOCAL_FEED}.sig` (override with `CLAWSEC_LOCAL_FEED_SIG`)
- Local checksums manifest: `~/.openclaw/skills/clawsec-suite/advisories/checksums.json`
- Pinned feed signing key: `~/.openclaw/skills/clawsec-suite/advisories/feed-signing-public.pem` (override with `CLAWSEC_FEED_PUBLIC_KEY`)
- State file: `~/.openclaw/clawsec-suite-feed-state.json`
- Hook rate-limit env (OpenClaw hook): `CLAWSEC_HOOK_INTERVAL_SECONDS` (default `300`)
**Fail-closed verification:** Feed signatures are required by default. Checksum manifests are verified when companion checksum artifacts are available. Set `CLAWSEC_ALLOW_UNSIGNED_FEED=1` only as a temporary migration bypass when adopting this version before signed feed artifacts are available upstream.
### Quick feed check
```bash
FEED_URL="${CLAWSEC_FEED_URL:-https://clawsec.prompt.security/advisories/feed.json}"
STATE_FILE="${CLAWSEC_SUITE_STATE_FILE:-$HOME/.openclaw/clawsec-suite-feed-state.json}"
TMP="$(mktemp -d)"
trap 'rm -rf "$TMP"' EXIT
if ! curl -fsSLo "$TMP/feed.json" "$FEED_URL"; then
echo "ERROR: Failed to fetch advisory feed"
exit 1
fi
if ! jq -e '.version and (.advisories | type == "array")' "$TMP/feed.json" >/dev/null; then
echo "ERROR: Invalid advisory feed format"
exit 1
fi
mkdir -p "$(dirname "$STATE_FILE")"
if [ ! -f "$STATE_FILE" ]; then
echo '{"schema_version":"1.0","known_advisories":[],"last_feed_check":null,"last_feed_updated":null}' > "$STATE_FILE"
chmod 600 "$STATE_FILE"
fi
NEW_IDS_FILE="$TMP/new_ids.txt"
jq -r --argfile state "$STATE_FILE" '($state.known_advisories // []) as $known | [.advisories[]?.id | select(. != null and ($known | index(.) | not))] | .[]?' "$TMP/feed.json" > "$NEW_IDS_FILE"
if [ -s "$NEW_IDS_FILE" ]; then
echo "New advisories detected:"
while IFS= read -r id; do
[ -z "$id" ] && continue
jq -r --arg id "$id" '.advisories[] | select(.id == $id) | "- [\(.severity | ascii_upcase)] \(.id): \(.title)"' "$TMP/feed.json"
jq -r --arg id "$id" '.advisories[] | select(.id == $id) | " Exploitability: \(.exploitability_score // "unknown" | ascii_upcase)"' "$TMP/feed.json"
done < "$NEW_IDS_FILE"
else
echo "FEED_OK - no new advisories"
fi
```
## Exploitability Context
Advisories in the feed can include `exploitability_score` and `exploitability_rationale` fields to help agents prioritize real-world threats:
- **Exploitability scores**: `high`, `medium`, `low`, or `unknown`
- **Context-aware assessment**: Considers attack vector, authentication requirements, and AI agent deployment patterns
- **Exploit availability**: Detects public exploits and weaponization status
When processing advisories, prioritize by exploitability in addition to severity. A HIGH severity + HIGH exploitability CVE is more urgent than a CRITICAL severity + LOW exploitability CVE.
For detailed methodology, see the [exploitability scoring documentation](../../wiki/exploitability-scoring.md).
## Heartbeat Integration
Use the suite heartbeat script as the single periodic security check entrypoint:
- `skills/clawsec-suite/HEARTBEAT.md`
It handles:
- suite update checks,
- feed polling,
- new-advisory detection,
- affected-skill cross-referencing,
- approval-gated response guidance for malicious/removal advisories,
- and persistent state updates.
## Approval-Gated Response Contract
If an advisory indicates a malicious or removal-recommended skill and that skill is installed:
1. Notify the user immediately with advisory details and severity.
2. Recommend removing or disabling the affected skill.
3. Treat the original install request as first intent only.
4. Ask for explicit second confirmation before deletion/disable action (or before proceeding with risky install).
5. Only proceed after that second confirmation.
The suite hook and heartbeat guidance are intentionally non-destructive by default.
## Advisory Suppression / Allowlist
The advisory guardian pipeline supports opt-in suppression for advisories that have been reviewed and accepted by your security team. This is useful for first-party tooling or advisories that do not apply to your deployment.
### Activation
Advisory suppression requires a single gate: the configuration file must contain `"enabledFor"` with `"advisory"` in the array. No CLI flag is needed -- the sentinel in the config file IS the opt-in gate.
If the `enabledFor` array is missing, empty, or does not include `"advisory"`, all advisories are reported normally.
### Config File Resolution (4-tier)
The advisory guardian resolves the suppression config using the same priority order as the audit pipeline:
1. Explicit `--config <path>` argument
2. `OPENCLAW_AUDIT_CONFIG` environment variable
3. `~/.openclaw/security-audit.json`
4. `.clawsec/allowlist.json`
### Config Format
```json
{
"enabledFor": ["advisory"],
"suppressions": [
{
"checkId": "CVE-2026-25593",
"skill": "clawsec-suite",
"reason": "First-party security tooling — reviewed by security team",
"suppressedAt": "2026-02-15"
},
{
"checkId": "CLAW-2026-0001",
"skill": "example-skill",
"reason": "Advisory does not apply to our deployment configuration",
"suppressedAt": "2026-02-16"
}
]
}
```
### Sentinel Semantics
- `"enabledFor": ["advisory"]` -- only advisory suppression active
- `"enabledFor": ["audit"]` -- only audit suppression active (no effect on advisory pipeline)
- `"enabledFor": ["audit", "advisory"]` -- both pipelines honor suppressions
- Missing or empty `enabledFor` -- no suppression active (safe default)
### Matching Rules
- **checkId:** exact match against the advisory ID (e.g., `CVE-2026-25593` or `CLAW-2026-0001`)
- **skill:** case-insensitive match against the affected skill name from the advisory
- Both fields must match for an advisory to be suppressed
### Required Fields per Suppression Entry
| Field | Description | Example |
|-------|-------------|---------|
| `checkId` | Advisory ID to suppress | `CVE-2026-25593` |
| `skill` | Affected skill name | `clawsec-suite` |
| `reason` | Justification for audit trail (required) | `First-party tooling, reviewed by security team` |
| `suppressedAt` | ISO 8601 date (YYYY-MM-DD) | `2026-02-15` |
### Shared Config with Audit Pipeline
The advisory and audit pipelines share the same config file. Use the `enabledFor` array to control which pipelines honor the suppression list:
```json
{
"enabledFor": ["audit", "advisory"],
"suppressions": [
{
"checkId": "skills.code_safety",
"skill": "clawsec-suite",
"reason": "First-party tooling — audit finding accepted",
"suppressedAt": "2026-02-15"
},
{
"checkId": "CVE-2026-25593",
"skill": "clawsec-suite",
"reason": "First-party tooling — advisory reviewed",
"suppressedAt": "2026-02-15"
}
]
}
```
Audit entries (with check identifiers like `skills.code_safety`) are only matched by the audit pipeline. Advisory entries (with advisory IDs like `CVE-2026-25593` or `CLAW-2026-0001`) are only matched by the advisory pipeline. Each pipeline filters for its own relevant entries.
## Optional Skill Installation
Discover currently available installable skills dynamically, then install the ones you want:
```bash
SUITE_DIR="${INSTALL_ROOT:-$HOME/.openclaw/skills}/clawsec-suite"
node "$SUITE_DIR/scripts/discover_skill_catalog.mjs"
# then install any discovered skill by name
npx clawhub@latest install <skill-name>
```
Machine-readable output is also available for automation:
```bash
node "$SUITE_DIR/scripts/discover_skill_catalog.mjs" --json
```
## Security Notes
- Always verify `checksums.json` signature before trusting its file URLs/hashes, then verify each file checksum.
- Verify advisory feed detached signatures; do not enable `CLAWSEC_ALLOW_UNSIGNED_FEED` outside temporary migration windows.
- Keep advisory polling rate-limited (at least 5 minutes between checks).
- Treat `critical` and `high` advisories affecting installed skills as immediate action items.
- If you migrate off standalone `clawsec-feed`, keep one canonical state file to avoid duplicate notifications.
- Pin and verify public key fingerprints out-of-band before first use.
钟馗.Skill——会更新漏洞库的安全审查专家。直来直去、快刀斩乱麻,三层审查(静态审计/行为模拟/供应链溯源)覆盖12类风险,输出结构化安全裁定(✅干净/⚠️可疑/🚫恶意)。Use when 用户说"审查这个Skill"、"安全检查"、"钟馗看下"、"审一下"、"查一下这个skill"、安装Skill前的安全评估、或需要审计SKILL.md的恶意载荷。
在使用技能包之前做安全扫描,并按结论决定放行或拦截的技能。
为 OpenClaw 配置 OpenRouter 免费模型与回退链的工具。
Parse, search, and analyze application logs across formats. Use when debugging from log files, setting up structured logging, analyzing error patterns, correlating events across services, parsing stack traces, or monitoring log output in real time.
用于安装技能、包或插件的安全检查。请在执行任何 npm install、openclaw plugins install、clawhub install 或类似安装命令之前使用。
网络安全与SRC漏洞掘金实战技能。融合「系统学习路径」与「SRC实战掘金」双模式: ①学习模式=法律→基础→工具→靶场→攻防→就业全流程; ②实战模式=直接指导在腾讯TSRC、阿里ASRC、百度BSRC等平台挖掘高价值漏洞变现。 当用户提出以下问题时触发: "我想学网络安全怎么入门""SRC漏洞怎么挖能赚钱""渗透测试需要学什么" "Web安全漏洞原理是什么""怎么准备CTF比赛""护网面试会问什么" "云安全怎么学""挖漏洞赚钱的方法""端口扫描脚本怎么写" "SQL注入怎么检测""子域名怎么枚举""XSS漏洞怎么找" "靶场怎么搭建""Kali Linux怎么用""Metasploit怎么入门" "等保测评是什么""代码审计怎么做""内网渗透怎么学" "信息泄露漏洞怎么挖""越权漏洞怎么测试""逻辑漏洞挖掘技巧" "简历怎么写才能进安全公司""安全行业面试题有哪些" "Burp Suite怎么用""DVWA怎么安装""Pikachu靶场搭建" "Vulhub漏洞复现""网络安全法有什么规定""CTF夺旗赛怎么参加" "AWD比赛是什么""应急响应怎么做""攻击溯源怎么搞" "数据安全怎么保障""公有云安全怎么防护""私有云攻防怎么做" "云原生安全是什么"。
这个技能特别简单——你只需要调用它,给一个网站域名,它就会自动帮你跑一遍渗透测试,找出这个网站存在哪些安全漏洞。 不需要你配环境、不用你手动发包,一切自动化。测完直接出结果,告诉你哪里有问题、怎么修。 它的愿景是:让每个人都能成为白帽黑客——只要输入一个域名,就能知道自己的网站安不安全。一切只为授权测试,只为发现漏洞、修复风险,让互联网更安全。
Security-first skill vetting for AI agents. Use before installing any skill from ClawdHub, GitHub, or other sources. Checks for red flags, permission scope, and suspicious patterns.
数据月份:2026-10 · 下载/星标数聚合自公开技能注册库(ClawHub、SkillHub),按月更新。口径说明见数据方法。