据 AlphaMoat 统计,截至 2026-10,node-connect 累计下载 7,524 次、获 2 个星标,按累计下载量在本次参与排名的 10,914 个 AI 技能中排名第 3,726 位,在「运维安全」分类(502 个)中排名第 112 位。
列表默认按累计下载量排序,也可按星标排序;详情页排名按累计下载量计算。
| 平台 | 累计下载 | 星标 | 评论 |
|---|---|---|---|
| ClawHub ↗ | 7,160 | 1 | - |
| SkillHub ↗ | 7,524 | 2 | — |
各平台的计数口径不同,统计时间不一致。
先区分本机、局域网、Tailscale tailnet 或公开 URL 路由;信息不清时询问用户使用的连接方式、错误原文和配对状态,再按实际路由检查配置与认证。批准配对前必须核实请求对应预期设备。
资料发布于 2026-10-27
以下是根据技能文档生成的示例,不代表实际运行结果。
2026-09 起统计方法调整:同名技能按作者分别统计,并覆盖全部技能。图中虚线为调整前的月份,与之后的数据不直接比较,也不计算跨越调整的增长。 该技能有同名的其他版本,调整前的数据归属当前下载量最大的这一个。
| 月份 | 累计下载 | 环比 | 星标 |
|---|---|---|---|
| 2026-10 | 7,524 | — | 2 |
| 2026-09 | 7,030 | — | 2 |
| 2026-08 | 6,924 | +5.8% | 2 |
| 2026-07 | 6,542 | +29.2% | 2 |
| 2026-06 | 5,064 | +7.7% | 1 |
| 2026-05 | 4,702 | — | 1 |
| 2026-03 | 2,388 | — | - |
以下是作者发布的原始文件,按纯文本显示,本站未做修改或审核;其中的链接不可点击,命令请核实后再运行。抓取于 2026-10-23。
--- name: node-connect description: Diagnose OpenClaw node connection and pairing failures for Android, iOS, and macOS companion apps. Use when QR/setup code/manual connect fails, local Wi-Fi works but VPS/tailnet does not, or errors mention pairing required, unauthorized, bootstrap token invalid or expired, gateway.bind, gateway.remote.url, Tailscale, or plugins.entries.device-pair.config.publicUrl. --- # Node Connect Goal: find the one real route from node -> gateway, verify OpenClaw is advertising that route, then fix pairing/auth. ## Topology first
Decide which case you are in before proposing fixes: - same machine / emulator / USB tunnel - same LAN / local Wi-Fi - same Tailscale tailnet - public URL / reverse proxy Do not mix them. - Local Wi-Fi problem: do not switch to Tailscale unless remote access is actually needed. - VPS / remote gateway problem: do not keep debugging `localhost` or LAN IPs. ## If ambiguous, ask first If the setup is unclear or the failure report is vague, ask short clarifying questions before diagnosing. Ask for: - which route they intend: same machine, same LAN, Tailscale tailnet, or public URL - whether they used QR/setup code or manual host/port - the exact app text/status/error, quoted exactly if possible - whether `openclaw devices list` shows a pending pairing request Do not guess from `can't connect`. ## Canonical checks Prefer `openclaw qr --json`. It uses the same setup-code payload Android scans. ```bash openclaw config get gateway.mode openclaw config get gateway.bind openclaw config get gateway.tailscale.mode openclaw config get gateway.remote.url openclaw config get gateway.auth.mode openclaw config get gateway.auth.allowTailscale openclaw config get plugins.entries.device-pair.config.publicUrl openclaw qr --json openclaw devices list openclaw nodes status ``` If this OpenClaw instance is pointed at a remote gateway, also run: ```bash openclaw qr --remote --json ``` If Tailscale is part of the story: ```bash tailscale status --json ``` ## Read the result, not guesses `openclaw qr --json` success means: - `gatewayUrl`: this is the actual endpoint the app should use. - `urlSource`: this tells you which config path won. Common good sources: - `gateway.bind=lan`: same Wi-Fi / LAN only - `gateway.bind=tailnet`: direct tailnet access - `gateway.tailscale.mode=serve` or `gateway.tailscale.mode=funnel`: Tailscale route - `plugins.entries.device-pair.config.publicUrl`: explicit public/reverse-proxy route - `gateway.remote.url`: remote gateway route ## Root-cause map If `openclaw qr --json` says `Gateway is only bound to loopback`: - remote node cannot connect yet - fix the route, then generate a fresh setup code - `gateway.bind=auto` is not enough if the effective QR route is still loopback - same LAN: use `gateway.bind=lan` - same tailnet: prefer `gateway.tailscale.mode=serve` or use `gateway.bind=tailnet` - public internet: set a real `plugins.entries.device-pair.config.publicUrl` or `gateway.remote.url` If `gateway.bind=tailnet set, but no tailnet IP was found`: - gateway host is not actually on Tailscale If `qr --remote requires gateway.remote.url`: - remote-mode config is incomplete If the app says `pairing required`: - network route and auth worked - approve the pending device ```bash openclaw devices list openclaw devices approve --latest ``` If the app says `bootstrap token invalid or expired`: - old setup code - generate a fresh one and rescan - do this after any URL/auth fix too If the app says `unauthorized`: - wrong token/password, or wrong Tailscale expectation - for Tailscale Serve, `gateway.auth.allowTailscale` must match the intended flow - otherwise use explicit token/password ## Fast heuristics - Same Wi-Fi setup + gateway advertises `127.0.0.1`, `localhost`, or loopback-only config: wrong. - Remote setup + setup/manual uses private LAN IP: wrong. - Tailnet setup + gateway advertises LAN IP instead of MagicDNS / tailnet route: wrong. - Public URL set but QR still advertises something else: inspect `urlSource`; config is not what you think. - `openclaw devices list` shows pending requests: stop changing network config and approve first. ## Fix style Reply with one concrete diagnosis and one route. If there is not enough signal yet, ask for setup + exact app text instead of guessing. Good: - `The gateway is still loopback-only, so a node on another network can never reach it. Enable Tailscale Serve, restart the gateway, run openclaw qr again, rescan, then approve the pending device pairing.` Bad: - `Maybe LAN, maybe Tailscale, maybe port forwarding, maybe public URL.`
钟馗.Skill——会更新漏洞库的安全审查专家。直来直去、快刀斩乱麻,三层审查(静态审计/行为模拟/供应链溯源)覆盖12类风险,输出结构化安全裁定(✅干净/⚠️可疑/🚫恶意)。Use when 用户说"审查这个Skill"、"安全检查"、"钟馗看下"、"审一下"、"查一下这个skill"、安装Skill前的安全评估、或需要审计SKILL.md的恶意载荷。
在使用技能包之前做安全扫描,并按结论决定放行或拦截的技能。
为 OpenClaw 配置 OpenRouter 免费模型与回退链的工具。
Parse, search, and analyze application logs across formats. Use when debugging from log files, setting up structured logging, analyzing error patterns, correlating events across services, parsing stack traces, or monitoring log output in real time.
用于安装技能、包或插件的安全检查。请在执行任何 npm install、openclaw plugins install、clawhub install 或类似安装命令之前使用。
网络安全与SRC漏洞掘金实战技能。融合「系统学习路径」与「SRC实战掘金」双模式: ①学习模式=法律→基础→工具→靶场→攻防→就业全流程; ②实战模式=直接指导在腾讯TSRC、阿里ASRC、百度BSRC等平台挖掘高价值漏洞变现。 当用户提出以下问题时触发: "我想学网络安全怎么入门""SRC漏洞怎么挖能赚钱""渗透测试需要学什么" "Web安全漏洞原理是什么""怎么准备CTF比赛""护网面试会问什么" "云安全怎么学""挖漏洞赚钱的方法""端口扫描脚本怎么写" "SQL注入怎么检测""子域名怎么枚举""XSS漏洞怎么找" "靶场怎么搭建""Kali Linux怎么用""Metasploit怎么入门" "等保测评是什么""代码审计怎么做""内网渗透怎么学" "信息泄露漏洞怎么挖""越权漏洞怎么测试""逻辑漏洞挖掘技巧" "简历怎么写才能进安全公司""安全行业面试题有哪些" "Burp Suite怎么用""DVWA怎么安装""Pikachu靶场搭建" "Vulhub漏洞复现""网络安全法有什么规定""CTF夺旗赛怎么参加" "AWD比赛是什么""应急响应怎么做""攻击溯源怎么搞" "数据安全怎么保障""公有云安全怎么防护""私有云攻防怎么做" "云原生安全是什么"。
这个技能特别简单——你只需要调用它,给一个网站域名,它就会自动帮你跑一遍渗透测试,找出这个网站存在哪些安全漏洞。 不需要你配环境、不用你手动发包,一切自动化。测完直接出结果,告诉你哪里有问题、怎么修。 它的愿景是:让每个人都能成为白帽黑客——只要输入一个域名,就能知道自己的网站安不安全。一切只为授权测试,只为发现漏洞、修复风险,让互联网更安全。
Security-first skill vetting for AI agents. Use before installing any skill from ClawdHub, GitHub, or other sources. Checks for red flags, permission scope, and suspicious patterns.
数据月份:2026-10 · 下载/星标数聚合自公开技能注册库(ClawHub、SkillHub),按月更新。口径说明见数据方法。